Menu
Geodesic Dome

Zip Tie Domes

Geodesic Dome Kits that are Easy to Build!

Geodesic Tunnel Dome 1 Extension Calculator

Zip Tie Domes

Geodesic Chicken Coop
Geodesic Dome Kits that are Easy to Build!

Geodesic Tunnel Dome 1 Extension Calculator

Zip Tie Domes

Geodesic Tunnel Dome 1 Extension Calculator

Click Here to Call Us:
1-931-858-6892

 

How to Use the Dome Calculator

1. Select Hub Size:
Select "No Hubs" to get the true "chord" length for each strut, which is the full distance for the strut between each geodesic dome vertex.
For most dome construction methods, you will use the "No Hubs" selection.
With our Zip Tie Domes Hub Design, the geodesic dome vertex is located in the middle of our "Center Ring".
When using our Hubs, the width of our Center Ring must be added to the strut length to give the true geodesic dome dimensions.
Select Standard 4" Hubs for calculating domes with our 4" Standard Hubs or Dual Covering Hubs, which have a 2.375" Center Ring. These hubs are used with 1" PVC pipe for struts.
Select Super 6" Hubs for calculating domes with our new 6" Super Hubs, which have a 3.5" Center Ring. These hubs are used with 1.5" PVC pipe for struts.
Select Mega 8" Hubs for calculating domes with our proposed 8" Mega Hubs, which will have a 4.5" Center Ring. These hubs will be used with 2" PVC pipe for struts.

2. Feet or Meters
Click the button for "Meters" if you are using metric measurements.

3. Data Entry:
Enter a number with or without a decimal fraction in any of the number fields on the left. (For example, enter "5" or "3.3333")
Click the Calculate Button. All of the other numbers will be automatically calculated.
The Blue Struts are always the longest struts. If you know your longest strut length, enter your data for the longest strut length in the Blue Strut field.
To build a strong dome, the longest strut should not be more than 6' long.

Cost Calculation and Material Utilization Chart
The default "Length of Pipe" for cutting your struts has been set to 10'. You can change this to 20' or whatever length of pipe you have to cut for your struts.
You can also update the "Cost Per Pipe" amount, and click the Calculate field, and the "Total Cost of Materials" amount will be calculated at the bottom of this section.
If you are cutting 4' struts, consider using 20' lengths of pipe, as there will be less waste as compared to cutting 4' lengths from 10' pipe.

Geodesic Tunnel Dome 1 Extension Calculator

This tunnel dome design was devised by Gerry Toomey, a dome consultant in Quebec, Canada, and is used here with his permission. Click here to contact Mr. Toomey.

Geodesic Tunnel Dome 1 Extension Calculator

Tunnel Dome Calculator 1 Extensions
Tunnel Dome 1 Ext.
 
Select Hub Size
No Hubs:     Standard 4" Hubs:     Super 6" Hubs:     Mega 8" Hubs:
Feet:   Meters:
 
Convert to Feet & Inches
Chord
 
 
Enter the Number of in One Field, then Click the "Calculate" Button.
 
 
 

Tunnel Dome Height

0 0"

 
 

Tunnel Dome Width / Diameter

0 0"

 
 

Length of 42 Blue "A" Struts

0 0"

 

 
 

Length of 26 Black "B" Struts

0 0"

 

 
 

Length of 30 Red "C" Struts

0 0"

 

 
 

Length of 8 Yellow "D" Struts

0 0"

 

 
 

Length of 2 Purple Support "E" Struts

0 0"

 

 
 

Tunnel Dome Radius

0 0"

 
 

Tunnel Dome Perimeter Length

0 0"

 
 

Tunnel Dome Floor Area in Square

 

0

Tunnel Dome Surface Area in Square

 

0

Tunnel Dome Volume in Cubic

 

0

Dome Base Perimeter Number of Sides

 

0

0 Sided Base Perimeter Length ()

 

0

0 Sided Base Floor Area (Square )

 

66

Total Number of Dome Panels / Faces

 

0

Surface Area for 66 Dome Panels / Faces (Square )

 

0

Total Volume of Tetrahedrons behind 66 Dome Panels / Faces in Cubic

 

0

Tunnel Dome Length ()

 

6

Number of Red 72° 5-Way Hubs

 

32

Number of Blue 60° 6-Way Hubs

 

3

Number of Purple Support 60° 6-Way Hubs

 

2

Number of Optional Side Support Brace Struts

 

0

Optional Side Support Brace Strut Length ()

 

8

Number of Support Strut Zip Ties

 

41

Number of Center Rings

 

212

Number of Zip Ties to Construct the Tunnel Dome

 

123

Number of Zip Ties to Secure the Inside Dual Covering Hubs (3 per hub)

 

123

Number of Zip Ties to Secure the Outside Dual Covering Hubs (3 per hub)

 

0 Length
0 Width  

Absolute Minimum Square Covering Dimensions for a Tightly Fitted Tunnel Dome Cover

 

0 Length
0 Width  

Minimum Square Covering Dimensions for a Tunnel Dome Cover Secured to the Hubs with Zip Ties with a Minimum Overlap at the Bottom of the Tunnel Dome

 

0 Length
0 Width  

Maximum Square Covering Dimensions for a Tunnel Dome Cover Secured to the Hubs with Zip Ties with an Ample Overlap at the Bottom of the Dome

 

0

Total Length of All Struts Added Together ()

Cost Calculation and Material Utilization Chart

 

 
 

Length of Pipe:

Cost Per Pipe:

 
 
Blue "A" Struts
 

 

Blue "A" Strut Units Entered:

0

Feet and Inches:

00"

 
 

Number of Pipes needed to Create (42) Blue "A" Struts:

0

 
 

Number of Blue "A" Struts Produced From Each Uncut Pipe:

0

 
 

Waste for First 0 Pipes after Cutting 0 Struts Each:

0 = 00"

 
 

<-

 
 

Number of Blue "A" Struts Created from the first 0 Pipes:

0

 
 

Number of Blue "A" Struts Created from the Last Pipe:

0

 
 

Waste on the Last Pipe after Cutting 0 Strut(s):

0

 
 

<-

 
 

Total Waste in Creating 42 Blue "A" Struts:

0

 
 
Black "B" Struts
 

 

Black "B" Strut Units Entered:

0

Feet and Inches:

00"

 
 

Number of Pipes needed to Create (26) Black "B" Struts:

0

 
 

Number of Black "B" Struts Produced From Each Uncut Pipe:

0

 
 

Waste for First 0 Pipes after Cutting 0 Struts Each:

0 = 00"

 
 

<-

 
 

Number of Black "B" Struts Created from the first 0 Pipes:

0

 
 

Number of Black "B" Struts Created from the Last Pipe:

0

 
 

Waste on the Last Pipe after Cutting 0 Strut(s):

0

 
 

<-

 
 

Total Waste in Creating 26 Black "B" Struts:

0

 
 
Red "C" Struts
 

 

Red "C" Strut Units Entered:

0

Feet and Inches:

00"

 
 

Number of Pipes needed to Create (30) Red "C" Struts:

0

 
 

Number of Red "C" Struts Produced From Each Uncut Pipe:

0

 
 

Waste for First 0 Pipes after Cutting 0 Struts Each:

0 = 00"

 
 

<-

 
 

Number of Red "C" Struts Created from the first 0 Pipes:

0

 
 

Number of Red "C" Struts Created from the Last Pipe:

0

 
 

Waste on the Last Pipe after Cutting 0 Strut(s):

0

 
 

<-

 
 

Total Waste in Creating 30 Red "C" Struts:

0

 
 
Yellow "D" Struts
 

 

Yellow "D" Strut Units Entered:

0

Feet and Inches:

00"

 
 

Number of Pipes needed to Create (8) Yellow "D" Struts:

0

 
 

Number of Yellow "D" Struts Produced From Each Uncut Pipe:

0

 
 

Waste for First 0 Pipes after Cutting 0 Struts Each:

0 = 00"

 
 

<-

 
 

Number of Yellow "D" Struts Created from the first 0 Pipes:

0

 
 

Number of Yellow "D" Struts Created from the Last Pipe:

0

 
 

Waste on the Last Pipe after Cutting 0 Strut(s):

0

 
 

<-

 
 

Total Waste in Creating 8 Yellow "D" Struts:

0

 
 
Purple Support "E" Struts
 

 

Purple Support "E" Strut Units Entered:

0

Feet and Inches:

00"

 
 

Number of Pipes needed to Create (2) Purple Support "E" Struts:

0

 
 

Number of Purple Support "E" Struts Produced From Each Uncut Pipe:

0

 
 

Waste for First 0 Pipes after Cutting 0 Struts Each:

0 = 00"

 
 

<-

 
 

Number of Purple Support "E" Struts Created from the first 0 Pipes:

0

 
 

Number of Purple Support "E" Struts Created from the Last Pipe:

0

 
 

Waste on the Last Pipe after Cutting 0 Strut(s):

0

 
 

<-

 
 

Total Waste in Creating 2 Purple Support "E" Struts:

0

 
 

COST OF MATERIALS GRAND TOTALS:

 
 

Total Waste for All Struts:

0

 
 

Number of Uncut Pipe/Materials Needed:

0

 
 

Total Cost of Materials @ $4.50 Each:

$

 

Tunnel Dome Weight Chart

 
Weight Chart 3/4" PVC 1" PVC 1.25" PVC 1.5" PVC 3/4" EMT 1" EMT 1.25" EMT 1.5" EMT 1" Bamboo 1.5" Bamboo
Lbs Per Linear Ft .21 .32 .43 .51 .43 .64 .95 1.10 .2 .4
42 Blue "A" Struts 0 0 0 0 0 0 0 0 0 0
26 Black "B" Struts 0 0 0 0 0 0 0 0 0 0
30 Red "C" Struts 0 0 0 0 0 0 0 0 0 0
8 Yellow "D" Struts 0 0 0 0 0 0 0 0 0 0
2 Purple Support "E" Struts 0 0 0 0 0 0 0 0 0 0
Total Weight of Struts (lbs) 0 0 0 0 0 0 0 0 0 0
Weight of Hubs, Rings, Zip Ties 0 0 0 0 0 0 0 0 0 0
Total Tunnel Dome Weight (lbs) 0 0 0 0 0 0 0 0 0 0
 

Geodesic Tunnel Dome 1 Extension Construction Diagram

 

Tunnel Dome 1 - End/Width Diagram
Tunnel Dome 1 - End/Width Diagram

 

Tunnel Dome 1 - Length Diagram
Tunnel Dome 1 - Length Diagram

 

Tunnel Dome 1 - Top Down Diagram
Tunnel Dome 1 - Top Down Diagram

 

Geodesic Tunnel Dome 1 Extension Tessellation Diagram

Geodesic Tunnel Dome 1 Extension Tessellation Diagram

 

Blue "A" Chord Factor:    

Black "B" Chord Factor:    

Red "C" Chord Factor:    

Yellow "D" Chord Factor:    

Purple Support "E" Chord Factor:    

Tunnel Dome Panels / Coverings

 

A Geodesic Tunnel Dome 1 Extension Will Require Panels / Coverings for:

 

 

18 A-A-A Equilateral Triangles

6 A-B-A Isosceles Triangles

 
 

 
 

30 C-B-C Isosceles Triangles

12 A-B-D Scalene Triangles

 
 

 

Total Triangles: 66

--------------------------------------------

 

Triangle Dimensions

 

18 A-A-A Equilateral Triangles

 
A-A-A Triangle
Base = "A"
Altitude A Decimal 0
Feet and Inches 0 0"
 
 
A-A-A
Triangle
Edge
Measurement Strut
Length
Center Ring
Hub Width
Triangle Edge
Total Length

A

Decimal 0 0 0
Feet and Inches 0 0" 0" 0 0"
 
Surface Area for Each A-A-A Triangle 0 Square

 

6 A-B-A Isosceles Triangles

 
A-B-A Triangle
Base = "A"
Altitude A Decimal 0
Feet and Inches 0 0"
 
A-B-A Triangle
Base = "B"
Altitude B Decimal 0
Feet and Inches 0 0"
 
 
A-B-A
Triangle
Edge
Measurement Strut
Length
Center Ring
Hub Width
Triangle Edge
Total Length

A

Decimal 0 0 0
Feet and Inches 0 0" 0" 0 0"

B

Decimal 0 0 0
Feet and Inches 0 0" 0" 0 0"
 
Surface Area for Each A-B-A Triangle 0 Square

 

30 C-B-C Isosceles Triangles

 
C-B-C Triangle
Base = "B"
Altitude B Decimal 0
Feet and Inches 0 0"
 
C-B-C Triangle
Base = "C"
Altitude C Decimal 0
Feet and Inches 0 0"
 
 
C-B-C
Triangle
Edge
Measurement Strut
Length
Center Ring
Hub Width
Triangle Edge
Total Length

B

Decimal 0 0 0
Feet and Inches 0 0" 0" 0 0"

C

Decimal 0 0 0
Feet and Inches 0 0" 0" 0 0"
 
Surface Area for Each C-B-C Triangle 0 Square

 

12 A-B-D Scalene Triangles

A-B-D Triangle
Base = "A"
Altitude A Decimal 0
Feet and Inches 0 0"
A-B-D Triangle
Base = "B"
Altitude B Decimal 0
Feet and Inches 0 0"
A-B-D Triangle
Base = "D"
Altitude D Decimal 0
Feet and Inches 0 0"
 
A-B-D
Triangle
Edge
Measurement Strut
Length
Center Ring
Hub Width
Triangle Edge
Total Length

A

Decimal 0 0 0
Feet and Inches 0 0" 0" 0 0"

B

Decimal 0 0 0
Feet and Inches 0 0" 0" 0 0"

D

Decimal 0 0 0
Feet and Inches 0 0" 0" 0 0"
 
Surface Area for Each A-B-D Triangle 0 Square

 


Geodesic Tunnel Dome 1 Extension Calculator generated by PERL on Monday, August 14, 2023.
Javascript Compiled On
Powered by Notepad++.
Software Design by johnhurt.com.
 

ZURB Foundation 5.0

Responsive Mobile Design

This Site Uses

ZURB Foundation

The most advanced responsive front-end framework in the world.

 

 

Flag of Scotland
Alba gu bráth - Scotland Until Judgment

Address To A Haggis

Fair fa' your honest, sonsie face,
Great chieftain o' the pudding-race!
Aboon them a' yet tak your place,
Painch, tripe, or thairm:
Weel are ye wordy o'a grace
As lang's my arm.

The groaning trencher there ye fill,
Your hurdies like a distant hill,
Your pin was help to mend a mill
In time o'need,
While thro' your pores the dews distil
Like amber bead.

His knife see rustic Labour dight,
An' cut you up wi' ready sleight,
Trenching your gushing entrails bright,
Like ony ditch;
And then, O what a glorious sight,
Warm-reekin', rich!

Then, horn for horn, they stretch an' strive:
Deil tak the hindmost! on they drive,
Till a' their weel-swall'd kytes belyve
Are bent like drums;
Then auld Guidman, maist like to rive,
Bethankit! hums.

Is there that owre his French ragout
Or olio that wad staw a sow,
Or fricassee wad make her spew
Wi' perfect sconner,
Looks down wi' sneering, scornfu' view
On sic a dinner?

Poor devil! see him owre his trash,
As feckles as wither'd rash,
His spindle shank, a guid whip-lash;
His nieve a nit;
Thro' blody flood or field to dash,
O how unfit!

But mark the Rustic, haggis-fed,
The trembling earth resounds his tread.
Clap in his walie nieve a blade,
He'll mak it whissle;
An' legs an' arms, an' hands will sned,
Like taps o' trissle.

Ye Pow'rs, wha mak mankind your care,
And dish them out their bill o' fare,
Auld Scotland wants nae skinking ware
That jaups in luggies;
But, if ye wish her gratefu' prayer
Gie her a haggis!

Robert Burns - 1786

To place an order online, visit our Online Catalog.

For a telephone order, call us at 1-931-858-6892.

Or, go to our Contact Us page to send us an email.

Follow Zip Tie Domes on FaceBook, YouTube, Pinterest and Instagram